TP-GPS906 BIKE GPS TRACKER USER MANUAL
Thank you for purchasing this GPS tracker. This manual shows how to operate the device smoothly and correctly in details, please make sure to read this manual carefully before using the device. Please be noted that any update of the manual is made without prior notice. Each time the update of the manual will be released in the latest product sales. The manufacturer won’t assume any legal responsibility for any errors or omissions made in this manual
Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS, APP, and Internet. It adopts the most advanced technology of GPS and AGPS dual positioning.
|Dim||40mm x 85mm x 28mm (1.5"*3.3"*0.7")|
|Battery||Chargeable changeable 3.7V 1800mAh Li-on battery|
|Time to First Fix|| Cold Status 45s
Warm Status 35s
Hot Status 1s
-40°C to + 85°C
|Original Temperature||-20°C to + 55°C|
|Humidity||5% - 96% non-condensing
|INDICATOR LIGHT STATUS||MEANING|
|Yellow light - Solid||NO GPRS signal|
|Yellow light - Flash||GPRS connection|
|Blue light - Solid||NO GPS signal|
|Blue light - Flash||GPS connection|
- The indicator light is ON when SIM card is inserted, but the light is off in few seconds.
- The device gets GPS location when there is GPS signal and gets LBS location when there is no GPS signal.
- The device automatically turns OFF when the SIM card is removed.
When the unit is in over-speed alarm, Shake sensor alarm, or low battery alarm, will send alarm information to the admin number. (13265790180）
Admin number Canceling:
Command : noadmin123456
Reply : noadmin ok
When the unit speed is over 70km/h, it will send message “speed alarm!” to the admin number every 5 minutes.
Over-speed Alarm canceling :
Command : nospeed123456
Reply : nospeed ok
4.5. Shake sensor setting
Command : shock123456
Message Reply : shock ok
If there aren't any alarms in 5 minutes, the unit will automatically set shake sensor alarm. In this case, it will
send message “sensor alarm!” to the admin number when the unit gets shaked .
Shake alarm Canceling:
Command : noshock123456
Reply : noshock ok
4.6. Device working mode setting (Factory setting is “Sleep by time mode“)
Sleep by time mode setting：
Command : sleep123456 time
Reply : sleep time ok
(SMS, calling or any other triggered alarm (Vibration excluded) tracker works for 5 minutes after wake up, and
then back to sleep, GPS module shut off, GSM module works in low consumption. SMS, calling or any other
triggered alarms (Vibration excluded) can awake the tracker.)
Sleep by shock sensor mode setting:
Command : sleep123456 shock
Reply : sleep shock ok
(No vibration and other triggered alarm, tracker will work in “sleep by shock” mode, GPS shut off,
GSM works in low consumption. Vibration, SMS, calling or any other triggered alarm (including vibration) can
awaken the tracker..)
4.7. Head light status setting
Set the head light ON
Command : LED123456 on
Reply : led on ok
The head light will keep on and flash all the time.
Set the head light on by shock sensor
Command : LED123456 shock
Reply : led shock ok
When the device shocked, the head light flashes. And when it was stopped in 5 seconds, the LED light turns off automatically.
Set the head light off
Command : LED123456 off
Reply : led off ok
The LED light will be off all the time.
Note：It costs much for the device electricity when the LED light flashes. So, please set the mode according to
4.8. Terminal (local) Time Setting
Command : timezone123456 local time zone
Reply : time ok!
4.9. Reset Hardware
Command : reset123456
Reply : reset ok
5. EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE
Pic 1：Replied real-time tracking information under GPS satellites signal.
- Lat: 22.63952 Long: 114.17122 Positioning of the latitude and longitude values.
- Spd: 000 This refers to the device moving speed. The unit is km/h.
- T:24/09/15 16:00 real-tracking time, the Default is London time. You can set language and time zone in APP.
- Bat: 100% The battery value is between 10% and 100%. Once it is less than 30%, it alarms.
- 2015070203: Device IMEI No. to log in APP and platform.
- Google Link: This is the link to the Google map showing the position of the device.
Pic 2：Replied LBS tracking information without GPS satellites signal.
- Lac:27a4 1223: Real-time LBS positioning data.
- T:24/09/15 15:17 LBS positioning time.
- Bat: 100% The battery value is between 10% and 100%. Once it is less than 30%, it alarms.
- Last: T:25/09/15 03:04 This is the time when tracker got last GPS signal.
- Google Link: This is the position of last GPS signal appeared.
6.3. Turn on GPRS function by sending command “GPRS123456” to the tracker and set the APN for it then its online tracking by APP and platform works.
|Turn ON GPRS||GPRS123456||GPRS OK|
(any existing will be replaced)
|apn+123456+space+apn content||apn ok|
|Set APN username||apnuser+123456+space+content||apnuser ok|
|Set APN password||apnpasswd+123456+space+content||apnpasswd ok|
|Set data upload interval (default: 43200 seconds)||Upload+123456+space+30||Upload ok|
- Logging in the APP with an account, it shows the positioning interface.
: Call the device phone number.
: Device number calls the master number.
: Transformation of satelite map and 2D map.
: Position transformation of device location and cell phone location.
: Battery, GPRS signal and GPS signal.
: Device name, Location, Time, Positioning Mode, Automatic navigation to the device location.
: Related information to the account
Click the icon: set the account name, password and picture.
Add device: add more devices under one account.
Map: device positioning interface.
Alarm Message: check all devices alert information under the account.
System Message: authorization to other accounts to add the devices under the account.
System setting: set related parameters of the account.
Switch Account : log out.
: Device related functions and settings.
Step count: account walking steps of the device in a day.
Track: view all route history of the device.
Geofence: set Geo fence to alarm.
Function: set functions.
Click the icon: set the device name, SIM number and picture.
Historical Track: view all route history of the device.
GEO Fence: set Geo fence to alarm.
Historical Alert : check device alert information.
QR Code: share the device to other accounts to add.
Device Setting：set related parameters of the device.
Guardian List: check the Binding account.
Unbind：lift the binding of device and account.
Related parameters to set the device:
Note: Function works when it is set in Real-time trackmode.
SOS number: all alarm information will be sent to the SOS number.
Set admin number: all alarm information will be sent to the master number.
Overspeed alarm: when device’s speed is over the setting speed, it will send alarm information to SOS number and master number.
Pedometer：Turn on/off the steps switch. ( The default steps switch is off. )
Call：the device can call-out any phone numbers.
LED Switch: Turn on/off the indicating light. ( The default LED light is on. )
Set the language and time zone：choose the language and time zone.
- 12 hrs (Standby mode): upload positioning data every 12 hours, this is the longest mode while using.
- 01 hrs (Extremely Power Saving): upload positioning data every one hour.
- 30 mins(Power Saving track ) upload positioning data every 30 minutes.
- 10 secs (Real-time track ): device continuously positioning. This is the shortest mode while using.
Suggestion: please choose standby mode if it’s not in emergency situations.
6.5 Positioning in an emergency.
If you want to position in emergency but device is in sleeping mode, you just call the device number, then you will receive a positioning message and the position will be uploaded to the platform and APP. Or you can send “upload123456 10” to the device number to star real-time tracking. (Please be noted that it costs much GPRS data traffic)
6.6 Tracking by Platform
1.Enter into the website www.tkstargps.net, and choose English.
2.Log in your account registered in APP.
- GPS tracking can be worked outdoor.
- Please make sure GSM SIM card supports making calls, sending messages, GPRS network.
- Please make sure GSM SIM card is with sufficient balance.
- Please make sure the GSM card has opened the call shows and turned off the call transfer.
- Please insert the GSM phone card correctly.
- Do not assembly and disassembly device at will.
|Cannot boot the device.||Please check the battery if it is full.|
|Called the device but no message replied.||If you send "G123456#" to the device but not any reply, it may be regarded as spam and blocked.
Please try to track it by APP or platform.
|Platform position is different from the actual position.||No uploading position time or no GPS signal: call the device phone number and receive the
position message. If it shows like Pic. 2, it means no GPS signal. The position is the last
GPS positioning location; If it shows like Pic. 1, it means the device doesn't reach the uploading time. You can send "upload123456 10" to star real-time tracking.
|Replied two positioning message.||Last means the last position history without GPS signal. Once it received GPS signal,
it will send the position message later. (Pic. 1)